Tumble Generator Valve Assembly: Removal

WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Release the fuel pressure. < Refer to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid and remove the fuel filler cap.
Remove the intake manifold. < Refer to REMOVAL , Intake Manifold. >
Disconnect the connector from the tumble generator valve assembly.

Fig 2: Locating Tumble Generator Valve Assembly Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector. < Refer to REMOVAL , Fuel Injector. >
Remove the tumble generator valve assembly from the intake manifold.

Fig 3: Locating Tumble Generator Valve Assembly Bolts
Courtesy of SUBARU OF AMERICA, INC.