FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 145 (Entertainment System) › Rear Accessory Power Supply Socket › Installation

Rear Accessory Power Supply Socket: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the socket assembly.
    NOTE: Align the groove of the console box assembly or the trim panel - rear apron LH with the claw of the socket assembly.
  2. Install the cover assembly - front console box assembly. (Console type)

    Tightening torque: 

    6.5 N.m (0.6 kgf-m, 4.8 ft-lb) 

  3. Install the trim panel - rear apron LH. (Luggage room type)
  4. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
About FixVault