Telematics Button
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Check the button.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
- SOS button
| Terminal No. |
Inspection conditions |
Standard |
| 6 - 1 |
OFF |
Approx. 1.6 kΩ |
| ON |
Less than 1 Ω |
- i-button
| Terminal No. |
Inspection conditions |
Standard |
| 3 - 1 |
OFF |
Approx. 1.6 kΩ |
| ON |
Less than 1 Ω |
- Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
| Terminal No. |
Inspection conditions |
Specification |
| 8 (+) - 2 (-) |
Apply battery voltage. |
Light ON |
- Check the indicator.
- Check the continuity between the connectors.
| Terminal No. |
Indicator |
Specification |
| 4 - 1 |
Green |
Continuity exists |
| 7 - 1 |
Red |
Continuity exists |
- Replace the overhead console or stereo camera cover assembly if the inspection result is not within the standard value.