FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 146 (Lighting System (Service Information)) › Back-up Light Bulb › Removal › Sedan Model

Sedan Model

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trim panel - trunk lid. < Ref. to REMOVAL , Trunk Room Trim. >
  3. Remove the bulb socket and back-up light bulb.
    CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
    Fig 1: Removing Bulb Socket And Back-Up Light Bulb
    G10277244Courtesy of SUBARU OF AMERICA, INC.
About FixVault