Room Light: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not remove the room light if removing the bulb only.

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
Remove the light assembly - room.
1. Remove the clips, and then remove the hook.
  
  Fig 1: Identifying Room Light Assembly Clips
  Courtesy of SUBARU OF AMERICA, INC.
2. Disconnect the connector and remove the light assembly - room.
Release the claws, and detach the lens and bulb.
CAUTION:
- Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
- When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
Fig 2: Detaching Lens And Bulb
Courtesy of SUBARU OF AMERICA, INC.