FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 150 (Anti-Theft System - Security And Locks) › Function Setting (Customize) › Procedure › Stopping Keyless Access System Function By Using Access Key

Stopping Keyless Access System Function By Using Access Key

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the driver's door, and then push the door lock knob forward (LOCK direction).
  2. Press the lock button of access key and trunk/rear gate button simultaneously for five seconds or more.
  3. The buzzer sounds for two seconds, and the function stops.
    NOTE: Perform the same procedures to re-activate the keyless access system from the disabled condition.
About FixVault