FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 150 (Anti-Theft System - Security And Locks) › Remote Openers › Installation › Fuel Flap

Fuel Flap

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flap - COMPL fuel to the saucer - COMPL.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  2. Install the saucer - COMPL.
    NOTE: Securely install the rubber portion of the saucer - COMPL to the fuel filler pipe assembly.
  3. Install the fuel filler cap to the saucer - COMPL.
    CAUTION: Always replace with a new clip, because engagement of the claw weakens.
  4. Attach the ring clips.
    CAUTION: Always replace with a new part, because engagement of the claw weakens.
  5. Install the fuel filler pipe protector.
  6. Install the cable assembly - fuel.
  7. Install the trim panel - trunk side RH. (Sedan model)
  8. Install the trim panel - rear apron RH. (OUTBACK model)
About FixVault