Crankshaft Position Sensor: Installation
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the crankshaft position sensor to the cylinder block, and connect the connector to the crankshaft position sensor.
Tightening torque:
6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
- Install the air intake boot. < Ref. to INSTALLATION , Air Intake Boot. >
- Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >