Engine Coolant Temperature Sensor: Installation
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine coolant temperature sensor, and connect the connector to the engine coolant temperature sensor.NOTE: Use a new gasket.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
- Fill engine coolant. < Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >