FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 156 (Fuel Injection System (H6DO)) › Camshaft Position Sensor › Installation › Intake Side

Intake Side

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the camshaft position sensor, and connect the connector to the camshaft position sensor.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

  2. Install the fuel injector. < Ref. to INSTALLATION , Fuel Injector. >
  3. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  4. Install the collector cover.
About FixVault