FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 156 (Fuel Injection System (H6DO)) › Intake Manifold › Disassembly

Intake Manifold: Disassembly

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injector pipe and the fuel hose, and remove the fuel pipe assembly.
    Fig 1: Locating Fuel Pipe Assembly Bolts
    G10263560Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Locating Intake Manifold Bolts
    G10263561Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine harness. < Ref. to ENGINE HARNESS , COMPONENT, General Description. >
  3. Remove the EGR control valve. < Ref. to REMOVAL , EGR Control Valve. >
  4. Remove the EGR pipe B. < Ref. to EGR PIPE B , REMOVAL, EGR Pipe. >
  5. Remove the manifold absolute pressure sensor. < Ref. to REMOVAL , Manifold Absolute Pressure Sensor. >
  6. Remove the purge control solenoid valve. < Ref. to REMOVAL , Purge Control Solenoid Valve. >
About FixVault