DTC C2548 Vehicle Dynamics Control Module System: DTC Detecting Condition
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
When error flag from VDCCM is detected for 2 seconds after the ignition switch is ON.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. Read the DTC of VDC system using the Subaru Select Monitor. |
Is a DTC related to VDC system (sensors) detected? | Perform the diagnosis according to the DTC. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 2 . |
| 2 CHECK LAN SYSTEM. Perform the diagnosis for LAN system using the Subaru Select Monitor. < Ref. to BASIC DIAGNOSTIC PROCEDURE . > |
Is a DTC related to CAN communication detected? | Perform the diagnosis according to the DTC. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Replace the steering gearbox. < Ref. to ELECTRIC POWER STEERING GEARBOX . > |