Read Current Data: List
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| Item Name | Contents | Standard | Note |
|---|---|---|---|
| Trip Count | Time stamp information, trip counter | - | - |
| Count | Time stamp information, original counter identification information | - | - |
| Time Count [msec] | Time stamp information, time counter | - | - |
| F Sensor Signal | Output voltage value from front vehicle height sensor | 5V | Fixed at 5 V because front vehicle height sensor is not equipped. |
| R Sensor Signal | Output voltage value from rear vehicle height sensor | Approx. 2.5 V | Changes according to vehicle condition. |
| Actuator Signal | Power supply voltage value to headlight beam leveler actuator | Not in operation: 0% In operation: 10 - 90% (17 seconds) | Changes according to vehicle condition. |
| ECU ACC | IG voltage condition of auto headlight beam leveler control module | 8 - 16 V | - |
| Indicator Signal | Meter indicator condition | Light off: Normal Light up: Abnormal Blinks 3 times at 2 Hz.: When blinking 3 times at 2 Hz Blinks 2 times at 2 Hz.: When blinking twice at 2 Hz Check Bulb: When checking bulbs |
- |
| Vehicle Speed Signal | Vehicle speed condition | Show vehicle speed | - |
| H/L Lo Signal | Headlight lighting condition | Light off: light switch OFF Light up: light switch HEAD or light switch AUTO with light sensor operated |
- |
| LED HEADLAMP(LH) error Signal | Open circuit detection signal status | OFF: Open circuit not detected ON: Open circuit detected |
Displays as «Invalid» because the LED headlight is not equipped. |
| LED HEADLAMP(RH) error Signal | Open circuit detection signal status | OFF: Open circuit not detected ON: Open circuit detected |
Displays as «Invalid» because the LED headlight is not equipped. |