FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 179 (Infotainment System (Diagnostics)) › Inspection Mode › Operation

Inspection Mode: Operation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

DTC can be diagnosed by executing the Inspection Mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.

  1. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
  2. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step  1).
  3. After the ignition switch is ON, wait for one minute or more.
  4. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
About FixVault