Inspection Mode 1
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B1401 | METER COLLATION | - |
| B1402 | IMMOBILIZER KEY COLLATION | - |
| B1407 | MET COMMUNICATION | - |
| B1408 | METER NON-VOLATILE MEMORY | - |
| B1410 | TRANSPONDER COMMUNICATION | - |
| B1411 | IMMOBILIZER ANTENNA | - |
| B1413 | IMMOBILIZER CONTROL MODULE BATTERY POWER SUPPLY | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
- Read the DTC and check that the DTC is not displayed. < Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) . >NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step 1).
- Remove the ignition key from the ignition switch, and insert again.
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed. < Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) . >NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.