FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 194 (Sunroof) › Sunshade › Installation

Section 194 (Sunroof): Sunshade: Installation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach protective tape on the handle and the edge surface of the sunshade assembly, and install the sunshade assembly.
  2. Install the drain holder.
  3. Install the rail assembly - sunroof. < Ref. to INSTALLATION , Sunroof Assembly. >
  4. Install the trim panel - roof assembly. < Ref. to INSTALLATION , Roof Trim. >
  5. Install the lid assembly - sunroof. < Ref. to INSTALLATION , Glass Lid. >
  6. Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
About FixVault