Rear ABS Wheel Speed Sensor: Removal

WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Disconnect the connector from the rear ABS wheel speed sensor.

Fig 1: Identifying Rear ABS Wheel Speed Sensor Connector
Courtesy of SUBARU
Remove the sensor harness clamp of the rear sub frame.

Fig 2: Identifying Rear Sub Frame Sensor Harness Clamp
Courtesy of SUBARU
Remove the bolts and then remove the sensor harness bracket from the upper arm.

Fig 3: Locating Sensor Harness Bracket Mounting Bolts
Courtesy of SUBARU
Remove the bolts, and remove the rear ABS wheel speed sensor from the rear axle.
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
Fig 4: Locating Rear ABS Wheel Speed Sensor Mounting Bolt
Courtesy of SUBARU