Service Data
WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
| Drive pinion bearing preload (For new bearing) | Measured with spring measurement (Measured at companion flange bolt hole) N (kgf, lbf) | T-type (B2) | 18.1 - 38.8 (1.8 - 4.0, 4.1 - 8.7) |
| T-type (H3) | 24.1 - 38.6 (2.5 - 3.9, 5.4 - 8.7) | ||
| Measured with torque wrench N.m (kgf-m, ft-lb) | T-type (B2) | 0.69 - 1.47 (0.07 - 0.15, 0.51 - 1.08) | |
| T-type (H3) | 0.98 - 1.57 (0.10 - 0.16, 0.72 - 1.16) | ||
| Side gear backlash | mm (in) | T-type (B2) | 0.10 - 0.20 (0.004 - 0.008) |
| Side bearing standard width | mm (in) | 20.00 (0.7874) | |
| Hypoid driven gear to drive pinion backlash | mm (in) | 0.10 - 0.20 (0.004 - 0.008) | |
| Hypoid driven gear runout on its back surface | mm (in) | 0.05 (0.002) | |
| Companion flange mating surface runout | mm (in) | 0.08 (0.003) | |
| Companion flange runout on its inner surface | mm (in) | 0.08 (0.003) | |
| Total preload (Measured from the companion flange bolt hole) | N (kgf, lbf) | T-type (B2) | 20.7 - 54.4 (2.1 - 5.5, 4.7 - 12.2) |
| T-type (H3) | 26.5 - 53 (2.7 - 5.4, 6.0 - 11.9) | ||