FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 57 (Anti-Theft System - Security And Locks) › Impact Sensor › Installation

Impact Sensor: Installation

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the doors, trunk lid and rear gate.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  5. Install the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
About FixVault