Other Adjustment Operations Before Delivering The Vehicle To Customer

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Due to service and parts replacement convenience, perform the following operations before delivering the vehicle to the customer.

No.	Item	Check operation	Adjustment operation	Additional adjustment operations when replacing parts
1	Positions of devices Steering Room mirror Door mirror Seat Air conditioner vent grille	Is the device set to the same position when the vehicle was received from the customer?	Adjust the device to the similar position when the vehicle was received from the customer.	When removing/installing each device Meter, instrument panel, steering column, etc. Room mirror, roof trim, sunroof assembly, etc. Door mirror, door panel, etc. Seat, floor carpet, parking brake lever, etc. Vent grille, instrument panel, console box, etc.
2	Positions of switches Wiper, light (AUTO or OFF) Headlight beam leveler Illumination control Room light Seat heater, etc.	Is the switch set to the same position when the vehicle was received from the customer?	Set the switch to the same position when the vehicle was received from the customer.	When removing/installing each switch
3	Position of antenna	Is the antenna set to the same position when the vehicle was received from the customer?	Adjust the position of antenna.	When removing/installing the antenna and washing the vehicle