Day Time Running Resistor: Inspection
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
| Terminal No. |
Inspection conditions |
Standard |
1 - 2
2 - 3 |
Always |
1.82±0.07 Ω |
- Replace the resistor assembly - daytime running light if the inspection result is not within the standard.