Room Light: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not remove the room light if removing the bulb only.

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the light assembly - room.
1. Remove the clips, and then remove the hook.
  
  Fig 1: Identifying Room Light Clips
  Courtesy of SUBARU OF AMERICA, INC.
2. Disconnect the connector and remove the light assembly - room.
Release the claws, and detach the lens and bulb.
CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.

Fig 2: Detaching Lens And Bulb
Courtesy of SUBARU OF AMERICA, INC.