Trunk Room Light: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not remove the trunk room light if removing the bulb only.

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the light assembly - trunk room.
1. Release the claws.
2. Disconnect the connector and remove the light assembly - trunk room.
  
  Fig 1: Removing Trunk Room Light Assembly
  Courtesy of SUBARU OF AMERICA, INC.
Release the claws to open the bulb cover, then remove the bulb.
CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

Fig 2: Releasing Claws To Bulb Cover
Courtesy of SUBARU OF AMERICA, INC.