FixVault
Home › Subaru › 2015 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 66 (Fuel Injection System (H6DO)) › Oil Flow Control Solenoid Valve › Installation › Intake Side

Intake Side

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intake oil flow control solenoid valve, and connect the connector to the intake oil flow control solenoid valve.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

  2. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  3. Install the collector cover.
About FixVault