Front Strut: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Lift up the vehicle, and then remove the front wheels.
Remove the front strut assembly.
1. Place an alignment mark on the camber adjusting bolt and strut.
2. Remove the brake hose bracket.
  
  Fig 1: Locating Brake Hose Bracket
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the nut on the upper side of front stabilizer link and the ABS wheel speed sensor harness.
  
  Fig 2: Locating Nut On Upper Side Of Front Stabilizer Link
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the two bolts securing the housing assembly - front axle to the strut.
  NOTE: While holding the head of the adjusting bolt, loosen the flange nut.
5. Remove the three nuts securing the strut mount - front to the body.
  
  Fig 3: Removing Nuts
  Courtesy of SUBARU OF AMERICA, INC.