Inspection Mode 1
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B1401 | M Collation NG | - |
| B1402 | Immobilizer Key Collation NG | - |
| B1407 | M Communication Abnormal | - |
| B1408 | Meter EEPROM Abnormal | - |
| B1410 | Transponder Communication Abnormal | - |
| B1411 | Immobilizer Antenna Abnormal | - |
| B1413 | Immobilizer Control Module Battery Power Supply Failure | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step 1).
- Remove the ignition key from the ignition switch, and insert again.
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.