Inspection Mode 3
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B1570 | Antenna | - |
| B1571 | Reference Code Incompatibility | - |
| B1572 | IMM Circuit Failure (Except Antenna Circuit) | - |
| B1574 | Key Communication Failure | - |
| B1575 | Incorrect Immobilizer Key | - |
| B1576 | EGI Control Module EEPROM | - |
| B1577 | IMM Control Module EEPROM | - |
| B1578 | Meter Failure | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. <Ref. to CLEAR MEMORY MODE .>
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step 1).
- Start the engine, and then run the engine at idle for 10 seconds or more. Or, disconnect and reconnect the battery, then turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.