System Operation Check Mode: Operation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Make sure that the system operation check mode is performed when the engine is not running.
- After executing the system operation check mode, execute the Clear Memory Mode.
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Transmission Control System}.
- Select {Work Support} in the «Transmission Control System» display.
- On «Work Support» display, select {System Operation Check Mode}.NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
| Item | SSM display |
|---|---|
| Actuator ON/OFF Operation | F & R Clutch Solenoid |
| Secondary Solenoid | |
| Primary Down Solenoid | |
| Primary Up Solenoid | |
| AWD Solenoid | |
| Lock-Up Duty Solenoid | |
| Lock-up ON/OFF Solenoid |