- Remove the transmission assembly from the vehicle. <Ref. to
REMOVAL , Automatic Transmission Assembly.>
- Remove the air breather hose. <Ref. to
REMOVAL , Air Breather Hose.>
- Remove the transmission harness. <Ref. to
REMOVAL , Transmission Harness.>
- Remove the secondary speed sensor. <Ref. to
REMOVAL , Secondary Speed Sensor.>
- Remove the inhibitor switch. <Ref. to
REMOVAL , Inhibitor Switch.>
- Remove the extension case. <Ref. to
REMOVAL , Extension Case.>
- Remove the rear drive shaft. <Ref. to
REMOVAL , Rear Drive Shaft.>
- Remove the transfer clutch assembly. <Ref. to
REMOVAL , Transfer Clutch.>
- Remove the center differential carrier. <Ref. to
REMOVAL , Center Differential Carrier.>
- Remove the transfer reduction driven gear assembly. <Ref. to
REMOVAL , Transfer Reduction Driven Gear.>
- Remove the intermediate case. <Ref. to
REMOVAL , Intermediate Case.>
- Remove the forward clutch assembly. <Ref. to
REMOVAL , Forward Clutch Assembly.>
- Remove the reduction driven gear. <Ref. to
REMOVAL , Reduction Driven Gear.>
- Remove the oil pan and control valve body. <Ref. to
REMOVAL , Control Valve Body.>
NOTE:
When removing the control valve body, also remove the pressure pipe if it is attached on the case.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the CVTF pipe using a tire lever etc.
NOTE:
Remove by hooking the stepped portion of CVTF pipe with a tire lever etc.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the transmission case.
NOTE:
The total number of transmission case mounting bolts is 15.
- Remove the O-ring of lubrication pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the control device system. <Ref. to
REMOVAL , Transmission Control Device.>