Front Exhaust Pipe: Installation

Install the front exhaust pipe.
NOTE: Use a new gasket.

Tightening torque:

40 N.m (4.1 kgf-m, 29.5 ft-lb)

Fig 1: Locating Front Exhaust Pipe Bolts
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Front Exhaust Pipe Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the joint pipe to the exhaust manifold RH.
NOTE: Use a new gasket.

Tightening torque:

42.5 N.m (4.3 kgf-m, 31.3 ft-lb)

Fig 3: Locating Exhaust Manifold RH Joint Pipe Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the exhaust manifold RH lower cover and exhaust manifold LH cover.
Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 4: Locating Exhaust Manifold RH And LH Cover Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the front oxygen (A/F) sensor. <Ref. to INSTALLATION , Front Oxygen (A/F) Sensor.>
Install the under cover. <Ref. to INSTALLATION , Front Under Cover.>
Lower the vehicle.
Connect the battery ground terminal.