FixVault
Home › Subaru › 2015 › WRX STI › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (STI) › Engine Coolant Temperature Sensor › Removal

Engine Coolant Temperature Sensor: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the generator. <Ref. to REMOVAL , Generator.>
  3. Drain engine coolant. <Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.>
  4. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor
    G08538734Courtesy of SUBARU OF AMERICA, INC.
About FixVault