Sedan Model
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the gasket - rear combination with a new part.
- Install the light assembly - rear combination.CAUTION: Be careful not to catch the harness in between the parts.
Tightening torque:
4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
- Install the trunk room trim.
- Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>