Unit Inspection

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Check of select lever ASSY

Measure the resistance between the terminals.

RESISTANCE

Inspection terminals	Inspection conditions (shift position)	Standard value
1 - 3	Select lever in any other than P position	Less than 1 Ω
2 - 3	Select lever in P position
8 - 9	When select lever is in M position and shifted to "+"
10 - 11	Select lever in M position
12 - 13	When select lever is in M position and shifted to "-"
1 - 3	Select lever in P position	10 k Ωor more
2 - 3	Select lever in any other than P position
8 - 9	Except when select lever is in M position and shifted to "+"
10 - 11	Select lever in any other than M position
12 - 13	Except when select lever is in M position and shifted to "-"

Fig 1: Select Lever Assy Terminals Layout

Courtesy of SUBARU OF AMERICA, INC.

Check of shift lock solenoid ASSY

Measure the resistance between the terminals.

RESISTANCE

Inspection terminals	Inspection conditions	Standard value
4 - 5	20°C	27.6 to 30.5 Ω

Fig 2: Shift Lock Solenoid Assy Terminals Layout

Courtesy of SUBARU OF AMERICA, INC.