Wiper Switch: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Windshield Wiper Switch assembly

Courtesy of SUBARU OF AMERICA, INC.

Installation of the windshield wiper switch assembly
1. Fit in the tab and install the windshield wiper switch assembly in the direction of the arrow in the figure.
2. Connect each connector.
Installation of the steering column cover upper
1. Fit in the tabs and install the steering column cover upper on the steering column assembly.
Installation of the steering column cover lower
1. Fit in the 6 tabs and install the steering column cover lower.
2. Turn the steering wheel left and right, and using 2 screws, secure the steering column cover lower.
Installation of the steering column cover support (when there is smart entry)
1. Fit in the 4 tabs and install the steering column cover support.
Installation of the instrument panel meter ornament upper (Refer to INSTALLATION )
Installation of the meter hood sub-assembly (Refer to INSTALLATION )
Installation of the instrument cluster finish panel sub-assembly CTR (Refer to INSTALLATION )
Installation of instrument panel under-cover sub-assembly NO. 1 (Refer to INSTALLATION )
Installation of the instrument side panel LH (Refer to INSTALLATION )