FixVault
Home › Subaru › 2016 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 20 (Wiper System & Washer System) › Wiper Switch › Unit Inspection

Unit Inspection

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Windshield Wiper Switch assembly Connector Terminals
G08557939Courtesy of SUBARU OF AMERICA, INC.
  1. Inspection of the windshield wiper switch assembly
    1. Measurement of the resistance
      1. Measure the resistance between connector terminals.

      Resistance

      FRONT WIPER SWITCH

      Inspection terminals (Terminal symbol) Inspection conditions (switch over) Standard value
      D58-3 (+1) - D58-2 (+B) MIST Less than 1 Ω
      D58-3 (+1) - D58-1 (+S) OFF
      D58-3 (+1) - D58-1 (+S) INT
      D58-3 (+1) - D58-2 (+B) LO
      D58-4 (+2) - D58-2 (+B) HI
      FRONT WASHER SWITCH

      Inspection terminals (Terminal symbol) Inspection conditions (switch over) Standard value
      D57-3 (WF) - D57-2 (EW) OFF 10 kΩ or more
      ON Less than 1 Ω
About FixVault