Power Window Regulator Master Switch Assembly: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Installation of power window regulator master switch assembly
1. Engage the 6 claws and install the power window regulator master switch assembly to the front armrest base panel UPR LH.
  
  Fig 1: Identifying Power Window Regulator Master Switch Assembly
  Courtesy of SUBARU OF AMERICA, INC.
Installation of the power window regulator master switch assembly W/front armrest base panel UPR LH (Refer to ADJUSTMENT )
Installation of the front door trim board SUB-assembly LH (Refer to ADJUSTMENT )
Installation of the door armrest cover LH (Refer to ADJUSTMENT )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
Settings when removing/installing battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )