Unit Inspection
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Inspection of defogger relay
- Measure the resistance between connector terminals as shown below.
RESISTANCE
| Inspection terminals |
Inspection conditions |
Standard value |
| 3 - 5 |
When battery voltage is not applied between terminals 1 - 2. |
10 kΩ or more |
| When battery voltage is applied between terminals 1 - 2. |
Less than 1 Ω |
Courtesy of SUBARU OF AMERICA, INC.