FixVault
Home › Subaru › 2016 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 5 (Glass & Power Window System) › Window Defogger System › Customize Function

Customize Function

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Customization of window defogger system
    1. Customize using the SSM3
      1. Connect the SSM3 to the DLC3 and turn the ignition to IG ON.
      2. On the SSM3 display, select [Each System Check] →[Integ. unit mode] →[Unit customizing] and perform the customization setting.
      Display name Initial setting Contents Setting Controller ECM
      Rear defogger operation mode Normal Rear defogger operation drive mode setting Normal (1) / Continuous (2) Main body ECM (Network gateway computer)
      (1) Rear defogger operation is turned OFF after 15 minutes.
      (2) Rear defogger repeats 15-min. operation and 2-min. stop.
About FixVault