FixVault
Home › Subaru › 2016 › BRZ Limited, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 5 (Glass & Power Window System) › Window Defogger System › Display Of Current Data/System Operation Check Mode

Display Of Current Data/System Operation Check Mode

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspection with SSM3
    1. Data monitor
      1. Using SSM3, check [Current Data Display] to determine functionality and narrow down the defective part.
      SSM3 SCREEN: [EACH SYSTEM CHECK]→ [INTEG. UNIT MODE]→ [CURRENT DATA DISPLAY & SAVE]

      Item Name Description/display range Normal value Remarks
      [Rr Defogger op. mode] Rear defogger operation status/Display range: Normal - Continuous(1) Normal: OFF after 15 minutes Continuous: 15-min. operation and 2-min. stop are repeated. -
      [Rear Defogger SW Input] Rear defogger switch status/Display range: [ON] - [OFF] - -
      [Rr Defogger output] Rear defogger output status/Display range: [ON] - [OFF] - -
      (1) For automatic air conditioning system
      SSM3 DISPLAY: [EACH SYSTEM CHECK] →[AIR CONDITION SYSTEM] →[CURRENT DATA DISPLAY.SAVE]

      Item Name Description/display range Normal value Remarks
      [Rear Defogger relay] Rear defogger relay status/Display range: [ON] - [OFF] - -
    2. [System Operation Check Mode]
      1. Using SSM3, check [System Operation Check Mode] to determine functionality and narrow down the defective part.
      SSM3 DISPLAY: [EACH SYSTEM CHECK] →[INTEG. UNIT MODE] →[SYSTEM OPERATION CHECK MODE]

      Item Name Drive
      [Rear defogger] Rear defogger output ON / OFF
      SSM3 DISPLAY: [EACH SYSTEM CHECK] →[POWER WINDOW] →[SYSTEM OPERATION CHECK MODE]

      Item Name Drive
      [P seat power window UP/DOWN] UP / DOWN
About FixVault