How To Troubleshoot
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Bring in the car
Next
- Interview and phenomenon check
- Perform the interview and phenomenon check (Refer to CHECK LIST FOR INTERVIEW
)
Next
- Perform the interview and phenomenon check (Refer to CHECK LIST FOR INTERVIEW
)
- Check vehicle status
- Inspection of CAN communication system
- Check CAN communication system. (Refer to
HOW TO TROUBLESHOOT
)RESULT
Result Go to Functioning properly A Not functioning properly B B: Go to the CAN communication system section (Refer to HOW TO TROUBLESHOOT )
A: Go to Next Step
- Check CAN communication system. (Refer to
HOW TO TROUBLESHOOT
)
- Symptom table
- Check the symptom table. (Refer to SYMPTOM TABLE
)RESULT
Result Go to Not applicable to the symptom table. A Applicable to the symptom table. B B: Go to Step 7.
A: Go to Next Step
- Check the symptom table. (Refer to SYMPTOM TABLE
)
- Based on the trouble phenomenon, perform troubleshooting following the steps below.
- Function check (refer to FUNCTION INSPECTION )
- ECM terminal matrix (Refer to ECM TERMINAL ARRANGEMENT )
- Display of current data/system operation check mode *1 (Refer to DISPLAY OF CURRENT DATA/SYSTEM OPERATION CHECK MODE
).
*1: For automatic air conditioning system
Next
- Adjustment, repair, or replacement
Next
- Confirmation test
Next: Complete