FixVault
Home › Subaru › 2016 › BRZ Series.HyperBlue › Repair and Diagnosis › Body & Frame › Door Locks › Wireless Door Lock Control System (Service Information) › Unlock Warning Switch Assembly › Unit Inspection

Unit Inspection

  1. Inspection of unlock warning switch assembly
    1. Resistance check
      1. Measure the resistance between the terminals.

        Resistance

        RESISTANCE REFERENCE

        Inspection terminals Inspection conditions Standard value
        1(UN+) - 2(UN-) When pin is pressed in Less than 1 Ω
        1(UN+) - 2(UN-) When pin is not pressed in 10 kΩ or more
        Fig 1: Unlock Warning Switch Assembly Connector Terminal Identification
        G10216173Courtesy of SUBARU OF AMERICA, INC.
About FixVault