FixVault
Home › Subaru › 2016 › BRZ Series.HyperBlue › Repair and Diagnosis › Electrical › Gauges › Meter/Gauge System › Meter & Gauge System › Current Data Display & Save/System Operation Check Mode

Current Data Display & Save/System Operation Check Mode

  1. Inspection with SSM3
    1. [Current Data Display & Save]
      1. Using SSM3, display the [Current Data Display & Save] screen. Check the computer data.

        SSM3 display: [Each System Check] →[Combination meter] →[Current Data Display & Save]

        SSM3 DISPLAY ITEM DESCRIPTION

        Item Name [Symbol] Description/display range Normal value Remarks
        [Auto/Trip selector SW status] ODO/TRIP Change SW state
        Display range: OFF/ON        		 ON: When the switch is pressed
        OFF: When the switch is released        		 If it is abnormal, the trip switch may be faulty
        [Bright (tail cancel) SW status] Tail relay SW state
        Display range: OFF/ON        		 ON: Light control switch TAIL
        OFF: Light control switch OFF        		 If it is abnormal, the tail relay or wiring harness may be faulty
        Passenger's seat buckle SW [P-Belt SW] Passenger's seat buckle SW state
        Display range: OFF/ON        		 ON: Passenger's seat buckle switch ON
        OFF: Passenger's seat buckle switch OFF        		 If it is abnormal, the passenger's seat buckle switch or wiring harness may be faulty
        [Display SW state] Display changeover SW state
        Display range: OFF/ON        		 ON: When the switch is pressed
        OFF: When the switch is released        		 If it is abnormal, the trip switch or wiring harness may be faulty
        [+B volt] Input voltage
        Display range: 0 to 25.5V        		 Input voltage is displayed 11 to 14 V -
        [Vehicle speed input value] Vehicle speed input value
        Display range: 0 to 255[km/h]        		 0 to 255[km/h]
        Roughly synchronized with actual vehicle speed        		 Check the reading error of the speed meter
        [Engine speed input value] Engine speed input
        Display range: 0 to 12750[r/min]        		 Engine running state
        Roughly synchronized with engine speed        		 Check the reading error of the tachometer
        [Engine water temperature input value] Engine coolant temperature input
        Display range: 0 to 127.5°C        		 Equivalent to ambient temperature: When engine is cold
        When engine is fully warmed up: 80 to 100°C (176 to 212°F)        		 If it is abnormal, the coolant temperature signal system may be faulty
        Fuel sender input value [Fuel Input] Input value of fuel sender
        Display range: 0 to 127.5[L]        		 Fuel level is displayed 4.0 to 50[L] If it is abnormal, the fuel sender gauge or wiring harness may be faulty
        Ambient temperature input value [Ambi Temp] Ambient temperature
        Display range: -40 to 87.5°C        		 Almost equals to the ambient temperature -
        [Illuminations control volume input value] Rheostat input status
        Display range: 0 to 100 %        		 Volume value of the rheostat is displayed
        0 to 100 %        		 If it is abnormal, the light control rheostat or wiring harness may be faulty
        External dimming output value [OUT LIGHT] External dimming output state
        Display range: 0 to 100 %        		 External dimming volume value is displayed
        0 to 100 %        		 If it is abnormal, the light control rheostat or wiring harness may be faulty
        [Key reminder buzzer sounding interval] Key reminder sound
        Display range: 600 ms, 900 ms, 1200 ms        		 Buzzer sounding interval is displayed FAST, NORMAL, SLOW -
        [Tail reminder buzzer] Tail reminder buzzer sound
        Display range: ON/OFF        		 Tail reminder buzzer operation is displayed
        ON, OFF        		 -
        [Speed warning buzzer] Speed warning buzzer sound
        Display range: ON/OFF        		 Speed warning buzzer operation is displayed
        ON, OFF        		 -
        NOTE: Items without settings are not displayed in the SSM3 or do not function.
    2. System Operation Check Mode
      1. Using SSM3, display the [System Operation Check Mode] screen according to the screen instructions and perform a check.

        SSM3 display: [Each System Check] →[Combination meter] →[Work Support] →[System Operation Check Mode]

        SSM3 DISPLAY ITEM DESCRIPTION

        Item Name Contents of testing Check item
        [Speed Meter Operation] Movement of the speed meter pointer 0, 40, 80, 120, 160, 200, 240 (km/h)(1)
        [TachoMeter Operation] Movement of the tachometer pointer 0, 1000, 2000, 3000, 4000, 5000, 6000, 7000 (r/min)(1)
        [Fuel Meter Operation] Movement of the fuel meter pointer (Refer to FUEL RECEIVER GAUGE [DISPLAY 1] )
        • Sender E point [Display A]
        • Meter E scale [Display B]
        • Warning lighting position [Display C]
        • Meter 1/4 scale [Display D]
        • Meter 1/2 scale [Display E]
        • Meter 3/4 scale [Display F]
        • Meter F scale [Display G]
        • Sender F point [Display H]
        [AT indicator No. 1] Display on the multi display Illuminates L, 2, 3, 4, D, N, R, or P (position)
        [AT indicator No. 2] Display on the multi display Illuminates 5, 6, 7, 8, M, or S (position)
        [AT indicator No. 3] Display on the multi display Illuminates sport shift D
        [Display No. 1] Display on the multi display Illuminate 6, 5, 4, 3, 2, 1, 0, or all.
        [Display No. 2] Display on the multi display 9, 8, 7
        [High-beam indicator] Display on the meter indicator BEAM
        [Front Fog Light indicator] Display on the meter indicator FR FOG
        [Rear Fog Light indicator] Display on the meter indicator RR FOG
        [Airbag warning] Display on the meter indicator AIRBAG
        [Driver side seat belt warning] Display on the meter indicator D SEAT BELT
        [P seat seat-belt warning] Display on the meter indicator P SEAT BELT
        [Door (ALL) warning] Display on the meter indicator DOOR
        [Remaining fuel warning] Display on the meter indicator FUEL
        [ABS Warning Lamp] Display on the meter indicator ABS
        [Slip Indicator Light] Display on the meter indicator SLIP
        [TRC OFF indicator] Display on the meter indicator TRC OFF
        [Tire Pressure warning] Display on the meter indicator Tire pressure
        [Brake Warning Light] Display on the meter indicator Brake
        [SPORT indicator] Display on the meter indicator SPORT
        [SNOW indicator] Display on the meter indicator SNOW
        [A/T Oil Temperature warning] Display on the meter indicator AT OIL TEMP
        [Electric power steering warning] Display on the meter indicator EPS
        [Cruise indicator] Display on the meter indicator CRUISE (green)
        [Shift indicator (up)] Display on the multi display Shift (up)
        [Shift indicator (down)] Display on the multi display Shift (down)
        [SET indicator] Display on the meter indicator SET
        [VSC OFF indicator] Display on the meter indicator VSC OFF
        [Cruise warning] Display on the meter indicator CRUISE (yellow)
        [Smart system indicator] Display on the meter indicator Smart warning (green)
        [Smart system warning] Display on the meter indicator Smart warning (yellow)
        [Check engine warning] Display on the meter indicator Check engine
        [Water thermometer] Movement of the water thermometer pointer (Refer to WATER TEMPERATURE RECEIVER GAUGE [DISPLAY 2] )
        • 55°C {122°F} [Display A]
        • 60°C {140°F} [Display B]
        • 70°C {158°F} [Display C]
        • 80°C {176°F} [Display D]
        • Intermediate stable range [Display E]
        • 110°C {230°F} [Display F]
        • 120°C {248°F} [Display G]
        • 127°C {261°F} [Display H]
        (1) When performing the System Operation Check Mode, check if the actual meter reading is within the allowable range of meter reading (Refer to METER & GAUGE SYSTEM  ).
        NOTE:
        • Items without settings are not displayed in the SSM3 or do not function.
        • Telltales with no setting do not operate.
        • If items do not operate normally, it can be determined that the combination meter assembly is faulty.
      2. [Display 1]: Fuel receiver gauge
        Display Gauge indicator position
        A Sender E point
        B Meter E scale
        C Warning illumination point
        D Meter 1/4 scale
        E Meter 1/2 scale
        F Meter 3/4 scale
        G Meter F scale
        H Sender F point
        Fig 1: Fuel Receiver Gauge Angle Points
        G08557613Courtesy of SUBARU OF AMERICA, INC.
      3. [Display 2]: Water temperature receiver gauge
        Display Gauge indicator position
        A 50°C {122°F}
        B 60°C {140°F}
        C 70°C {158°F}
        D 80°C {176°F}
        E Intermediate stable range
        F 110°C {230°F}
        G 120°C {248°F}
        H 127°C {261°F}
        Fig 2: Water Temperature Receiver Gauge Angle Points
        G08557614Courtesy of SUBARU OF AMERICA, INC.
About FixVault