Customize Function
- Customization of meter & gauge system
- Customize using the SSM3
- With IG OFF, connect SSM3 to DLC3.
- Turn IG to ON, and turn on the SSM3.
- From the SSM3 screen, select [Customize] →[Warning] and perform the customization settings.
Display name Initial setting Contents Setting Controller ECM [Key Remind Sound] 1200 ms Setting of the warning cycle when the driver's door is opened while IG OFF or ACC ON 600 ms/900 ms/1200 ms Meter ECM [Taillight warning buzzer] [ON] Setting of the function that sounds a buzzer when the driver's door is opened while IG OFF and tail SW ON [ON]/[OFF] Meter ECM - From the SSM3 screen, select [Customize] →[Meter] and perform the customization settings.
Display name Initial setting Contents Setting Controller ECM [Outside temperature indication] 0°C Function of adjusting the difference from actual measurement by increasing/decreasing the displayed temperature (Temperature correction is only possible in increments of 1°C) +3°/+2°C/+1°C/0°C/- 1°C/-2°C/-3°C Meter ECM
- Customize using the SSM3