FixVault
Home › Subaru › 2016 › BRZ Series.HyperBlue › Repair and Diagnosis › Electrical › Starter › Starting System › Ignition (Starter) Switch Assembly › Installation

Ignition (Starter) Switch Assembly: Installation

  1. Ignition/starter switch assembly installation
    1. Install the ignition/starter switch assembly with the two screws.
    2. Connect the connector.
  2. Steering column cover upper installation (Refer to UNIT INSPECTION )
  3. Steering column cover lower installation (Refer to UNIT INSPECTION )
  4. Installation of instrument panel under cover sub-assembly No. 1 (Refer to INSTALLATION )
  5. Setting procedures when installing/removing the battery terminal (Refer to WORKING PRECAUTIONS AND NOTES )
About FixVault