FixVault
Home › Subaru › 2016 › BRZ Series.HyperBlue › Repair and Diagnosis › External Pages › Different car › Section 16 (Entertainment System) › Amplifier › Installation

Section 16 (Entertainment System): Amplifier: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the amplifier bracket.
    1. Install the amplifier bracket in place with the four screws.
  2. Install the amplifier ASSY (with attached bracket).
    1. Install the amplifier ASSY (with attached bracket) and fasten the three nuts.

      Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}

    2. Connect the two connectors to the stereo component amplifier ASSY (with attached bracket).
    3. Fasten the clamp to connect the wiring harness to the amplifier cover.
    4. Engage the clips and install the rear seat back cover.
  3. Install the trunk floor mat.
    1. Install the trunk floor mat.
About FixVault