Description of functions

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

The ABS motor relay is integrated into the brake actuator Assembly.

The skid control computer (brake actuator Assembly) turns on the ABS motor relay to operate the pump motor in the brake actuator Assembly while ABS, TRC, Vehicle stability control, or brake assist is operating.

If the power supply voltage for the ABS motor relay drops due to the battery or alternator's insufficient output, this code may be stored in memory.

Diagnostic codes	DTC detecting conditions	Faulty part
C146C	When the motor relay is started, power is not supplied to the pump motor. When the motor relay is not operating, voltage inside the pump motor increases. Skid control computer (brake actuator Assembly) detects improper operation of the pump motor.	ABS No. 2 fuse Wiring harness or connector Skid control computer (brake actuator Assembly)