FixVault
Home › Subaru › 2016 › BRZ Series.HyperBlue › Repair and Diagnosis › External Pages › Different car › Section 49 (Entry Start System Entry System (Keyless Entry)) › Entry & Start System (Entry Function) › DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM3 on.
    4. Enter the following menus: Body / Entry & Start / Trouble Codes.
    5. Check for DTCs.
  2. CHECK DTC
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM3 on.
    4. Enter the following menus: Body / Entry & Start / Trouble Codes.
    5. Clear the DTCs by following the directions on the SSM3 display.
About FixVault