Front Stabilizer Bar: Inspection

Inspection of front stabilizer link assembly LH
1. Inspection of ball joint
  1. Using aluminum plate, secure the front stabilizer link assembly LH in a vise.
  2. Install the mounting nut on the stud of the front stabilizer link assembly LH.
  3. Vibrate and turn the stud.
    Criteria: There is no abnormal interference or play during vibration and turning.
    
    Fig 1: Inspecting Front Stabilizer Link Assembly LH
    Courtesy of SUBARU OF AMERICA, INC.
  4. If there is abnormal interference or play during vibration and turning, replace the front stabilizer link assembly LH.
2. Dust cover inspection
  1. Check the dust cover for cracks or grease leakage.
  2. If there are cracks or grease leakage on the dust cover, replace the front stabilizer link assembly LH.