Function Check: Operation
NOTE:
In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Body Control» and then select «Enter».
- On «Select Function» display, select «Active Test».NOTE:
- If not equipped (depending on destination area or vehicle equipment condition), process will not go on.
- The operation is disabled for the models with keyless access with push button start system because the key lock solenoid is not installed.
- For detailed operation procedures, refer to "Application help".