FixVault
Home › Subaru › 2016 › Crosstrek Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (Except Hybrid) › Tumble Generator Valve Actuator › Removal

Tumble Generator Valve Actuator: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08317298Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector (A) from tumble generator valve assembly, and remove the tumble generator valve actuator.
    • RH side
      Fig 2: Identifying Tumble Generator Valve Assembly Connector With Screws (RH Side)
      G08315447Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      Fig 3: Identifying Tumble Generator Valve Assembly Connector With Screws (LH Side)
      G08315446Courtesy of SUBARU OF AMERICA, INC.
About FixVault